มีหลายสาเหตุที่ทำให้เครื่องบราเดอร์แสดงข้อความ no paper หรือ no paper fed ตรวจสอบจุดต่างๆต่อไปนี้เพื่อล้างข้อความ no paper หรือ no paper fed. Cause 2 the machine is out of paper or paper is not properly loaded in the paper tray cause 3 the paper is jammed in the machine. If paper is in the tray, remove it and load it again. When the no paper fed message appears, the following led indications is shown on the control panel.
There Are Several Reasons That The Brother Machine Displays No Paper Or No Paper Fed.
| Check the following points to clear these message. | Cause 3 the mp tray is out of. | Do one of the following using both hands, adjust the manual feed slot paper guides. | No paper fed mp tray will occur when your machine is trying to print from the mp tray but the paper isnt loaded, or the paper cant be pulled through. |
|---|---|---|---|
| Cause 3 the mp tray is out of. | Cause 2 the paper was. | The guides should only hold the paper in place without actually applying pressure. | Check the paper or media you are using can be used in the paper. |
| Cause 2 the paper was not inserted in the center position of the manual feed. | There are several reasons that the brother machine indicates no paper fed tray 1, no paper fed mptray, no paper fed again. | Follow the steps below to clear the no paper fed message cause 1 the photo bypass tray is located at the wrong position. | Check the following points to clear the no paper or no paper fed message. |
To Choose The Setting To Feed Paper From The Multipurpose Tray.
Make sure you insert the paper. Cause 1 the machine is out of paper or paper is not correctly loaded in the paper. Click the page layout tab. Cause 1 the machine is out of paper or paper is not correctly loaded in the paper tray, Refill paper in the mp tray. There are several reasons that the brother machine displays no paper, no paper fed tray 1, no paper fed tray 2, no paper fed tray 3, paper fed mp tray.Make sure the paper is flat in the tray and below the maximum paper mark.. Power the machine back on.. Check the following points to clear the no paper..
Press And Slide The Paper Width Guides And Then The Paper Length Guides To Fit The Paper Size Being Loaded Into The Tray.
Remove any paper currently loaded in the mp tray, There are several reasons that the brother machine displays no paper, no paper fed tray 1, no paper tray tray 2, Install the paper tray firmly back into the machine and confirm if the no paper message continues to appear, Click the mailings tab.There are several reasons that the brother machine displays no paper, no paper fed, no paper fed again or no paper fed mptray, There are several reasons that the brother machine displays no paper, no paper fed tray 1, no paper tray tray 2, Check the paper packaging, if necessary. Cause 2 incorrect media selected in the printer driver windows, No paper fed mp tray will occur when your machine is trying to print from the mp tray but the paper isnt loaded, or the paper cant be pulled through, Install the paper tray firmly back into the machine and confirm if the no paper message continues to appear.
Make Sure The Paper Is Flat In The Tray And Below The Maximum Paper Mark.
You Can Change The Paper Input Tray On The Printer Control Panel And Also On The Printer Driver.
Cause 2 the paper was, Follow the steps below to clear the no paper fed message cause 1 the photo bypass. Remove the paper tray from the machine and verify the paperguides are set to the correct positions marked on the tray for the paper size being loaded. Check the following points to clear these message, Once that has been done, continue to step 11.
vclip2vip Cause 2 the paper was not inserted in the center position of the manual feed. The maximum paper marks are located on the top of the right and left green paper guides. Cause 2 the mp tray is out of paper, or paper is not loaded correctly in the mp. No paper fed mp tray will occur when your machine is trying to print from the mp tray but the paper isnt loaded, or the paper cant be pulled through. Remove the paper tray from the machine and verify the paperguides are set to the correct positions marked on the tray for the paper size being loaded. nongmee porn
nookie คลิปหลุด Refill paper in the mp tray. มีหลายสาเหตุที่ทำให้เครื่องบราเดอร์แสดงข้อความ no paper หรือ no paper fed ตรวจสอบจุดต่างๆต่อไปนี้เพื่อล้างข้อความ no paper หรือ no paper fed. When the no paper fed message appears, the following led indications is shown on the control panel. Check the following points to clear these. Check the following points to clear the no paper or no paper fed message. nnnkx2 original audio
noey.atc No paper mp means the mp tray is out of paper or the paper is not loaded correctly in the mp tray. Cause 1 the machine is out of paper or paper is not correctly. There are several reasons that the brother machine displays no paper, no paper fed, no paper fed again or no paper fed mptray. There are several reasons that the brother machine displays no paper, no paper fed, no paper fed again or no paper fed mptray. No paper fed mp tray will occur when your machine is trying to print from the mp tray but the paper isnt loaded, or the paper cant be pulled through. noon_sutthipha xxx
nirvana in fire 2 Do not overfill the paper tray. Check the paper tray, mp tray, jam clear cover and paper. Cause 2 the paper was not inserted in the center position of the manual feed. There are several reasons that the brother machine indicates no. Check the paper packaging, if necessary.
nongwan tv Do one of the following using both hands, adjust the manual feed slot paper guides. The paper in the paper tray must be replaced with a new batch of letter size paper. Follow the steps below to clear the no paper fed message cause 1 the photo bypass tray is located at the wrong position. There are several reasons that the brother machine displays no paper, no paper fed. Follow the steps below to clear the no paper fed message cause 1 the photo bypass tray is located at the wrong position.
